TK36S Economical Small CNC Lathes
TK36S Economical Small CNC Lathes Introduction:
TK36 and EK40 series CNC lathe is controlled by GSK control and driven by servo motors. It has two 2 controllable axes. Operations of internal and external turning, taper turning, circular surface turning, facing, inch and metric threading are performed. Standard equipment---4-station vertical power turret meets different cutting requirements. The sliding door and a variety of caution plates guarantee operators safety. The lathe applies to light and manufacturing engineer industries for speedy and efficient machining of small/medium size workpieces especially nonferrous metals, or for teaching and training purposes in colleges.
TK36S Economical Small CNC Lathes Specifications:
Data of EK40 series
DescriptionEK40EK40.1000
CapacityMax. swing over bed (mm)Φ400
Max. swing over slide (mm)Φ200
Max. turning dia. (mm)Φ400
Distance between centers (mm)7501000
Max. turning length (mm)580830
SpindleSpindle thru-hole (mm)Φ57
Spindle noseISO702/I A2-6 manual chuck, 8" hyd. chuck
ISO702/I A2-5 6" hyd. chuck
Rotation sped of spindle (r/min)140-3000(infinite variable speed)
Max. output torque of spindle (Nm)83
Chuck dia. (mm)Φ200
Power of main motor (kw)5.5(freq. inverter)
TailstockDia./ travel of quill (mm)Φ65/120 (manual tailstock)
Taper of centerMT No.4
CarriageTravel X/Z (mm)230/590230/840
Rapid traverse X/Z (m/min)6/8
TurretNumber of stations/type4 (vertical)
Dia. of boring tool (mm)Φ32
Tool section (mm)2020
OthersPower source (kVA)12 kVA
Belt of main motor3V-710
Dimension (LWH) (mm)2150X1260X16002400X1260X1600
Total weight (kg)17002100
Max. machining weight (supported by tailstock center) (kg)550 (Φ200 manual 3-jaw chuck
Data of TK36 series
DescriptionTK36TK36S
CapacityMax. swing over bed (mm)Φ360
Max. swing over slide (mm)Φ180 (4/6-station)/Φ105 (comb type tool rest)
Φ120 (rear-mounted tool rest in case of 4-station)
Max. turning dia. (mm)Φ320 (4-station, comb type tool rest)/ Φ220 (6-station)
Distance between centers (mm)750/690(6-station)/650*
Max. turning length (mm)600/540(6-station)/500*
SpindleSpindle thru-hole (mm)Φ57
Spindle noseD type No.6 manual chuck
ISO702/I A2-5 6″ hyd. chuck
ISO702/I A2-6 8″ hyd. chuck
Rotation sped of spindle (r/min)140-3000(infinite variable speed)
Max. output torque of spindle (Nm)83
Chuck dia. (mm)Φ200
Power of main motor (kw)5.55.5/7.5
TailstockDia./ travel of quill (mm)Φ55/120 (100 hyd. tailstock); Φ75/150* (130* hyd. tailstock)
Taper of centerMT No.4/ MT No.5*
CarriageTravel X/Z (mm)200(150 6-station)/610/550(6-station)/510*
Rapid traverse X/Z (m/min)6/8
TurretNumber of stations/type4 (vertical)/6 (horizontal, optional)
Dia. of boring tool (mm)2020
Tool section (mm)Φ32
OthersPower source (kVA)12 kVA
Belt of main motor3V-670SPZ1987
Dimension (LWH) (mm)215012601600
Total weight (kg)1700
Max. machining weight (supported by tailstock center) (kg)550(Ф200 manual 3-jaw chuck), 360(6" hyd. chuck), 550(8" hyd. chuck)
Note:
(1) No tailstock is equipped when comb type tool rest or 6-station tool post is selected.
(2) Data marked with asterisk is for machine equipped with optional Φ75 tailstock quill.Economical CNC Lathe factory
website:http://www.oulangmech.com/cnc-lathe-...cal-cnc-lathe/